Wet-room drains and covers
Design selection
Grating and cover designs - match the surface to the bathroom style, just like with flush plates.
Design gratings (stainless)
Cantarutti design 128×128 mm gratings for X-CENTER systems - polished or satin; laser engraving on request.
Tileable cover
A discreet finish: the floor’s own tile, mosaic or wood surface is inset into the cover.
Stainless covers
Stainless steel covers and edge profiles for visible installation.
X-family
Floor-level shower systems - four solutions for every need.
X-CENTER
Centre grating with fall to the middle - the most versatile model, six sizes. Grating supports 5 / 9 / 13 mm plus adjustable up to 80 mm tile thickness.
6 sizes · centre grating
X-CENTER70
Low 70 mm build with an integrated shallow water trap - the first choice for renovations. Flow rate 48 l/min (double the EN 274 requirement); odour resistance 700 Pa (EN 1253 requires 400 Pa).
Depth 70 mm · centre grating
X-BORDER
Rectangular side grating with single-direction fall - a wide range of design gratings.
Side grating · design gratings
X-CORNER
Concealed drainage: water drains through slots in the side profiles - the floor surface continues uninterrupted with no visible grating.
Concealed drainage
Valsir
Linear drains
Technical data
| Standards | EN 274 · EN 1253 · EN 1253-1 · quality management certified to UNI EN ISO 9001:2008 |
Valsir
X-WALL
Wall-installed shower trap for floor-level showers
Product information
- Wall-installed shower trap available with two trap heights: 30 or 50 mm
- For renovation and new-build; all wall types and MFV prefabricated systems
- Integrated air-conditioning condensate connection - a separate inlet prevents odour return
- Stainless grating polished or matt, adjustable to tile thickness
- ABS body bonds with waterproofing membranes; fully serviceable
- Drain outlet to the left or right as required; adjustable siphon body height
- Excellent flow rate and high odour resistance - sufficient even for high-flow rain showers
Technical data
| Trap height | X-Wall30: 30 mm · X-Wall50: 50 mm |
| Flow rate | X-Wall30: 0.6 l/s (36 l/min) · X-Wall50: 0.8 l/s (48 l/min) |
| Min. installation height | X-Wall30: 70 mm · X-Wall50: 90 mm |
| Odour resistance | X-Wall30: 290 Pa · X-Wall50: 430 Pa |
| Body versions | masonry wall · plasterboard wall · MFV system (each 30 or 50 mm) |
| Grating | 330 × 100 mm · stainless polished or matt |
| Dimensions | Ø 40/50 mm · H 222/242 mm · installation depth H2 61/71 mm |
| Accessory | air-conditioning condensate connection Ø 32 mm |
| Standards | EN 274 · EN 1253-1 (X-Wall50) |
BIM objects:X-WALL ▸
Request a quote ▸ 📄 Brochure (PDF) 
Valsir
Floor and terrace gullies
Gully bodies, extensions and stainless gratings for new build and renovation
Valsir floor and terrace gullies cover drainage in bathrooms, wet rooms and terraces. The gullies ship as complete assemblies: body, extension and stainless steel grating.
Product information
- Inspectable construction: the water-seal insert is removable for cleaning
- Back-flow preventing valve on the models where it is supplied as standard
- The extension adapts the gully to the installation height and floor build-up
- Stainless gratings 100×100, 120×120 and 128×128 mm depending on the model
- Shallow models suit renovation where floor build-up is limited
Applications: floor drainage in bathrooms, floor-level showers, wet rooms and terraces, in both new build and renovation.
Gully body, vertical and horizontal inlets
Upper inlet Ø 110 mm, three Ø 50 mm side inlets and a Ø 75 mm side outlet. Water seal with a removable insert; 100 mm clearance needed for servicing. Adjustable lower support for ceiling mounting included.
Inspectable PP gully with extension
Three Ø 40 mm inlets with sealing rings and a Ø 50 mm outlet. Back-flow preventing valve; the extension is sealed with an O-ring. Supplied with a 120×120 mm stainless grating and extension.
Shallow gully with waterproofing sheet
Horizontal PP gully Ø 50 mm; installation depth including tiles 85–150 mm. Supplied with a 128×128 mm stainless grating, extension and a PVC waterproofing sheet with flange. Compatible with the Design gratings.
HDPE gully with back-flow valve
Weldable HDPE gully: three Ø 40 mm inlets and a Ø 50 mm outlet with an integrated back-flow preventing valve. Inlets are closed and drilled on use. Extension range 25–75 mm.
Shallow terrace gully
PP gully with one Ø 40 mm horizontal outlet, frame and 100×100 mm stainless grating. The 85 mm height suits applications with limited space, such as terraces.
PP gully with compression joints
Inspectable trapped PP gully with four Ø 40 mm compression-joint inlets and a Ø 50 or Ø 75 mm outlet depending on the version.
Approvals
Technical data
| Material | Polypropylene (PP) or high-density polyethylene (HDPE) depending on the model |
| Gratings | Stainless steel; 100×100, 120×120 or 128×128 mm |
| Connections | Inlets Ø 40 or Ø 50 mm; outlets Ø 50, Ø 75 or Ø 110 mm depending on the model |
| Installation depth | Shallow model 85–150 mm including tiles; extension range 25–75 mm |
| Standard | EN 1253 (floor gullies) |
BIM objects:Floor gullies ▸
Request a quote ▸
Valsir
Traps
Fixture and special-application traps for kitchens, bathrooms and plant rooms
The Valsir trap range covers kitchen and bathroom fixture traps as well as washing machine and special-application traps.
Product information
- Fixture-specific models for sinks, washbasins, bidets, bathtubs and shower trays
- Inspectable construction: the trap opens for cleaning without dismantling the fixture
- Extendable and flexible models ease installation in tight cabinets
- Some sink models are set up for a dishwasher connection with a blanking cap
- Weldable HDPE traps and condensate traps for special applications
Applications: kitchen and bathroom fixture connections, washing machine drainage and special applications in plant rooms.
Washbasin and bidet traps
White PP traps for washbasins and bidets. Models with a fixed threaded connection or a grommet; outlet Ø 32 or Ø 40 mm, inlet 1¼".
Tubular and extendable traps
Flexible extendable tubular trap for sinks: inlet 1½", outlet Ø 40/50 mm, length adjustable 340–740 mm. The range also includes shallow and self-cleaning tubular traps and bottle traps.
Bathtub waste and overflow sets
Cable-operated 3½" automatic waste with overflow; rectangular or round overflow cover. The range also includes one-piece bathtub traps in HDPE or PP.
Shower tray traps
Inspectable traps for shower trays with a Ø 90 mm hole; cover in polished chrome ABS. The shallow T-58 is only 58 mm high and its double water seal combines a generous flow rate with effective odour resistance.
Washing machine and special application traps
Recessed washing machine trap with cover plate, hose holder and access cap; outlet Ø 40/50 mm. For special applications, weldable HDPE traps with horizontal or vertical connection and condensate traps.
Approvals
Technical data
| Material | Polypropylene (PP), high-density polyethylene (HDPE) or ABS depending on the model |
| Connections | Inlet 1¼" or 1½"; outlet Ø 32, Ø 40 or Ø 50 mm |
| Shallow model | T-58 shower tray trap, height 58 mm |
| Extendable model | Length adjustable 340–740 mm |
| Standard | EN 1253 / UNI EN 274 depending on the model |